When finished, jigsaw puzzles give you a sense of satisfaction and are a terrific way to kill time. However, transporting the completed puzzle might be difficult and could lead to the pieces breaking. Your puzzle will be easier to carry and have a more sturdy surface for display if you glue it to a board. Here's how to do it.
Follow these steps to glue your jigsaw puzzle to a board:
Place the board on top of a sheet of wax paper that has been laid out on a flat surface. By doing this, the adhesive won't adhere to your work surface.
Apply a light coating of puzzle glue to the front of your puzzle using a paintbrush. Move outside from the center after beginning. Make sure to attach every component completely.
Let the puzzle glue dry completely. This could take up to several hours, so be patient.
Turn the puzzle carefully over onto the wax paper after the glue has fully dried. To protect the puzzle, make careful to handle this gently.
Place the puzzle onto the board after applying a thin layer of adhesive. Make sure the puzzle is correctly aligned by pressing down on it with a ruler.
Use a rolling pin to push the puzzle onto the board after placing a sheet of wax paper on top of it. This will make it easier to guarantee that every component is firmly attached to the board.
Let the puzzle dry completely. This could take up to 24 hours, so be patient.
After the puzzle has dried fully, cut the board's edges with a pair of scissors or a sharp knife. Your puzzle will seem neat and finished as a result.
Additional pointers for properly adhering your jigsaw puzzle to a board are provided below:
Make use of puzzle glue made especially for this. Regular glue shouldn't be used because it can not work as well and could harm your puzzle.
To prevent breathing in glue fumes, work in a well-ventilated environment.
Take your time and be patient. A puzzle that is inadequately glued could be the result of rushing the procedure.
When your puzzle is fastened on the board, think about framing it. It will be safer and simpler to display thanks to this.
Gluing a jigsaw puzzle to a board is a great way to preserve it and display it as a work of art. Follow the steps outlined in this article, and you'll have a beautifully preserved puzzle in no time.
No, function puzzle glue that has been specifically created for this function. It's possible that ordinary glue won't work as effectively and will harm your puzzle.
Up to several hours may pass before the puzzle glue is entirely dry. A minimum of 24 hours should pass before framing or exhibiting your puzzle.
We do not advise hastening the drying process with a hairdryer. The effect could be ruined as a result of the puzzle pieces shifting or warping as a result.
Yes, you can attach your puzzle to a variety of different boards. Just make sure the board is the proper size and strong enough to handle the puzzle's weight.
You can carefully remove extra glue from your puzzle by wiping it off with a moist cloth. Don't clean too vigorously or you can ruin the puzzle.
A jigsaw puzzle can be preserved and displayed as a work of art by being glued to a board. Use puzzle glue created especially for this reason, work in a space with good ventilation, and take your time. You can have a nicely preserved puzzle that you can enjoy for many years by following the instructions in this article.